How to Refill the Resin VAT During Printing?

To ensure a successful print, it's important to refill the resin vat as the resin level drops. If the resin vat runs out of resin during a print, you can add more resin without having to turn off the printer. You can follow the steps below:

1. Refill Resin during Printing 

• Not pausing the printing process
• Remove or open the printer's UV cover or chamber 
• Slowly pour additional resin into the resin vat while the building plate moves up and the UV Light is not turned ON.
• Close the printer’s UV cover or chamber and continue printing

2. Important Notes

• Do not overfill the resin vat as this may cause spillage and damage your printer.
• After each print, use the yellow plastic scraper included in your toolbox to remove any cured resin left on the building plate and FEP film.
• Learn how to remove cured resin from the FEP film here.