The FEP film is a multi-layer transparent foil that is installed on the resin vat of your 3D printer. It allows UV light to pass through and cure the liquid resin during the printing process. If you notice a decrease in print quality, such as low-quality 3D models, or if you see dents, scratches, or deformation on the FEP film, it may be time to replace it. Additionally, an increase in printing failure rates could also indicate that it's time to replace your FEP or PFA (nFEP) film.
Choosing the Right Size of FEP and PFA (nFEP) Film
The following table shows the different sizes of FEP and PFA (nFEP) film that Phrozen offers:
|
Film Size |
FEP | nFEP | LCD size | Applicable Models |
| 210 x 290 mm | ⬤ | ⬤ |
5.5” LCD 6.1” LCD 8.9” LCD 9.3” LCD |
Sonic Mini 8K S Sonic Mini 8K Sonic Mini 4K Sonic Mini Sonic Mighty 4K Sonic 4K 2022 Sonic XL 4K 2022 Sonic 4K Sonic XL 4K Sonic Shuffle Series |
| 310 x 220 mm | ⬤ | 10” LCD | Sonic Mighty 8K | |
| 450 x 280 mm | ⬤ | 15” LCD | Sonic Mega 8K | |
| 380 x 250 mm | ⬤ | 13.3” LCD | Transform Series |
Contact Support
If you find any issues, feel free to reach out to Phrozen Support or your Authorized Reseller for further assistance. When contacting Phrozen Support, kindly send some photos or videos illustrating the issue.
Comments
0 comments
Article is closed for comments.