Suggested support settings

Do you know that you can customize your supports by toggling through the support tabs and adjust the values based on your needs? For first-time users and beginners, please keep on reading this article as it provides a list of recommended settings when using CHITUBOX’s auto support settings.

1. Small Format Devices (LCD 5.5” & 6.1”)

• Light supports
• Upper Diameter: 0.6 mm
• Lower Diameter: 0.8 mm
• Density: >70%

2. Medium Format Devices (LCD size 8.9” & 9.3”)

• Light supports
• Upper Diameter: 0.8 mm
• Lower Diameter: 1.0 mm
• Density: >70%

3. Large Format Devices (LCD size 13.3”)

• Light supports
• Upper Diameter: 1.0 mm
• Lower Diameter: 1.2 mm
• Density: >70%

4. Setting Up Rafts

• Raft Shape: None
• Raft Area Ratio: >110%
• Raft Thickness: 1.0mm
• Raft Height: 1.0mm

After adding supports, please check to see if there are any islands or unsupported areas left on the 3D model.