The interface for adjusting your 3D printer's settings is vary depending on your printer model. You may need to use either Phrozen OS or the suggested slicer software to modify parameters such as layer thickness, exposure time, and resin type.
Refer to the table below to determine which platform is best suited for your model.
| Series | Model | Slicer Softwares | Phrozen OS |
| Sonic Mini Series | Sonic Mini 8K S | ⬤ | |
| Sonic Mini 8K | ⬤ | ||
| Sonic Mini 4K | ⬤ | ||
| Sonic Mini | ⬤ | ||
| Sonic Mighty Series | Sonic Mighty 8K | ⬤ | |
| Sonic Mighty 4K | ⬤ | ||
| Sonic Mega Series | Sonic Mega 8K | ⬤ | |
| Sonic Series | Sonic 4K | ⬤ | |
| Sonic | ⬤ | ||
| Sonic XL 4K | ⬤ | ||
| Shuffle Series | Shuffle XL Lite | ⬤ | |
| Shuffle 4K | ⬤ | ||
| Shuffle 2019 | ⬤ | ||
| Shuffle 2018 | ⬤ | ||
| Shuffle Lite | ⬤ | ||
| Shuffle XL 2019 | ⬤ | ||
| Shuffle XL 2018 | ⬤ | ||
| Transform Series | Transform Fast | ⬤ | |
| Transform Standard | ⬤ |
Contact Support
If you find any issues, feel free to reach out to Phrozen Support or your Authorized Reseller for further assistance. When contacting Phrozen Support, kindly send some photos or videos illustrating the issue.
Comments
0 comments
Article is closed for comments.