This article provides guidance on how to add your 3D printer to Slicer Software. If your resin 3D printer is not listed in the software's menu, you can manually input the printer's data - Resolution and Size to add it to the list of available options.
Adding the new printer manually in Slicer
Here's an example of how to add Sonic Mighty 8K to CHITUBOX:
- Open CHITUBOX and click on Settings
- Click on Add New Printer > Others > Default
- Input the following printer data
- Resolution:X and Y pixels (px)
- Size:X, Y, and Z millimeters (mm)
- Mirror: Select LCD_Mirror or Normal
By manually inputting the printer's data, you can ensure that CHITUBOX is configured to work optimally with your machine, resulting in more accurate and precise prints.
Resolution and Print Size of Phrozen Printer
The table below provides the size and resolution for a range of 3D printers. By following the steps above, you can add your printer model manually.
Series | Model | Resolution (px) | Size (mm) | Mirror |
Sonic Mini Series | Sonic Mini 8K S |
X:7536 Y:3240 |
X:165.792 Y:71.28 Z:170 |
LCD_mirror |
Sonic Mini 8K |
X:7500 Y:3240 |
X:165 Y:71.28 Z:180 |
LCD_mirror | |
Sonic Mini 4K |
X:3840 Y:2160 |
X:134.4 Y:75.6 Z:130 |
LCD_mirror | |
Sonic Mini |
X:1080 Y:1920 |
X:68.04 Y:120.96 Z:130 |
Normal | |
Sonic Mighty Series | Sonic Mighty 8K |
X:7680 Y:4320 |
X:218.88 Y:123.12 Z:235 |
LCD_mirror |
Sonic Mighty 4K |
X:3840 Y:2400 |
X:199.68 Y:124.8 Z:220 |
LCD_mirror | |
Sonic Mega Series | Sonic Mega 8K |
X:7680 Y:4320 |
X:330.24 Y:185.76 Z:400 |
Normal |
Sonic Series | Sonic 4K |
X:3840 Y:2160 |
X:134.4 Y:75.6 Z:200 |
LCD_mirror |
Sonic |
X:1080 Y:1920 |
X:68.04 Y:120.96 Z:170 |
LCD_mirror | |
Sonic XL 4K |
X:3840 Y:2400 |
X:192 Y:120 Z:200 |
LCD_mirror | |
Shuffle Series | Shuffle XL Lite |
X:2560 Y:1600 |
X:192 Y:120 Z:200 |
LCD_Mirror |
Shuffle 4K |
X:2160 Y:3840 |
X:68.04 Y:120.96 Z:170 |
Normal | |
Shuffle |
X:1440 Y:2560 |
X:67.68 Y:120.32 Z:200 |
Normal | |
Shuffle Lite |
X:1440 Y:2560 |
X:68.04 Y:120.96 Z:170 |
Normal | |
Shuffle XL |
X:2560 Y:1600 |
X:192 Y:120 Z:200 |
Normal | |
Transform Series | Transform |
X:3840 Y:2160 |
X:291.84 Y:164.16 Z:400 |
Normal |
Make | Make |
X:1440 Y:2560 |
X:67.68 Y:120.32 Z:200 |
Normal |
To ensure that your Phrozen 3D printer is fully supported, we suggest downloading the most up-to-date version of CHITUBOX.
Comments
0 comments
Article is closed for comments.