Amit Sahai
- Total activity 320
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 195
Articles
Recent activity by Amit Sahai-
[Wash & Cure Unit] Cure Station: Checking the Motor Cable Connections
Before reaching out for external support when encountering an issue with the motor of your Cure Station, it's worthwhile to perform some troubleshooting steps. This guide offers straightforward ins...
-
[Sonic Mega 8K V2] Replacing the Touch Panel
When the touch panel of your printer becomes malfunctional or broken, a replacement will be necessary. In this article, we’ll guide you through the steps of replacing the touch panel on the Phro...
-
[Sonic Mega 8K V2] Checking the Touch Panel
If you're experiencing issues with the touch panel on your Sonic Mega 8K V2, such as unresponsiveness or erratic behavior, don't worry, there are some steps you can take to see if the issue is s...
-
[Sonic Mega 8K V2] Setting up Your Printer
Before starting to print, you need to set up the printer properly. In this article, we will provide a step-by-step guide to setting up your Sonic Mega 8K V2. By following the instructions, you can ...
-
[Sonic Mega 8K S] Pump & Fill Unit - Replacing the New Auto-Feeder Board
The Auto-Feeder board serves as a crucial component within the Sonic Mega 8K S Pump & Fill Unit, dictating when the Printer should initiate the Pump and Fill process into the Resin VAT. However, o...
-
[Sonic Mighty 12K] Replacing the Touch Panel
When the touch panel of your printer becomes malfunctional or broken, a replacement will be necessary. In this article, we’ll guide you through the steps of replacing the Touch Panel on the Phrozen...
-
[Sonic Mighty 12K] Checking the Touch Panel
Is the touch panel of your Sonic Mighty 12K behaving strangely? Has it become unresponsive, fully dark or white, etc.? These abnormal behaviors can be resulted from a loose cable connection or outd...
-
[Sonic Mighty 12K] How to Run the LCD Test
LCD is a critical component of resin-based 3D printers. The LCD screen is responsible for displaying the layers of the 3D model that will be printed. The light from the LCD screen passes through a ...
-
[Sonic Mighty Revo] Replacing the Touch Panel
When the touch panel of your printer becomes malfunctional or broken, a replacement will be necessary. In this article, we’ll guide you through the steps of replacing the Touch Panel on the Phro...
-
[Sonic Mighty Revo] Checking the Touch Panel
Is the touch panel of your Sonic Mighty Revo behaving strangely? Has it become unresponsive, fully dark or white, etc? These abnormal behaviors can be resulted from a loose cable connection or outd...